Pick the Right Metrics for MOM Success

September 30, 2021 – To respond adequately to the ever faster changing demand of their customers, manufacturers need to have clear visibility and transparency of what happens on their shop floor. The fourth industrial revolution has shown the importance of accessing the right data for intelligent decision support. Similarly, a successful implementation of a Manufacturing Operations Management (MOM) solution can only be achieved by first picking the right metrics to measure progress and identify shortcomings. Use this intelligence to realize Industry 4.0 success

In this webinar, MOMi president Jan Snoeij provided guidance on how to pick the right Key Performance Indicators (KPIs) to measure to success of your MOM implementation. He explained how to identify the relevant metrics to monitor your MOM deployment to maximize the likelihood of success.

Click on below to view Recording:
https://attendee.gotowebinar.com/recording/7670703706812239878

User Acceptance is Key for a Successful Manufacturing IT Implementation

July 14, 2021 – The fourth industrial revolution has shown the importance of accessing the right data for continuous improvement of our manufacturing performance. However, here there is more to it than just technology. IT is not a goal in itself.

When selecting any new software application, it is critical to remember why the project was originally conceived to help end user overcome an issue or improve performance. While this concept is obvious, it is often forgotten months into a vendor selection process, a scope of work discussion, or a lengthy purchase negotiation.

In this webinar, MOMi president Jan Snoeij provided insights into just how critical it is to keep a strong focus on user acceptance when defining a Manufacturing Execution (MES), Quality or Maintenance System. He shared practical steps that can be taken to avoid one of the top reasons why MES implementations fail: a lack of necessary user adoption.

Click on below to view Recording:
https://attendee.gotowebinar.com/recording/3578775524807017231

Why a Digital Ecosystem is Critical for Digital Transformation

Drive innovation, eliminate data silos, and improve operational resilience

June 16, 2021 – Driving product and service innovation is increasingly dependent upon an operations infrastructure that is not hindered by systems or equipment interoperability. Establishing and maintaining a digital ecosystem can overcome this challenge and is a critical part of becoming a digital enterprise.

In the last edition of this series of webinars for iBASEt, MOMi president Jan Snoeij explained the value of embracing an open operations ecosystem strategy. Modern applications with APIs seamlessly interoperate to enable a “best-in-breed” vendor strategy to complete your Industry 4.0 vision.

The series of webinars is organized by iBASEt, a solution provider focusing at Aerospace & Defense, Electronics, Industrial Equipment, Nuclear and Shipbuilding industry sectors.

Click on below to view Recording:
https://info.ibaset.com/on-demand-webinar-why-a-digital-ecosystem-is-critical-for-digital-transformation

The Importance of Embedded Quality

Improve agility and resilience by managing quality as an integrated process

May 12, 2021 – As manufacturers of highly engineered products look to ramp up production in a post-pandemic world, the need for resilient, flexible operations while maintaining high quality standards is still vital. This requirement dictates quality be managed as a seamless, integrated part of the production process.  Quality must be part of the product life cycle, from engineering and design through production.

In this seventh webinar for iBASEt, MOMi president Jan Snoeij told about what led to this quality transformation and that embedded quality is not just an option. It is a necessity to respond to the dynamics of the demand and the increasing complexity from ‘just our factory’ to end-to-end lifecycle and the entire supply chain. Therefore, integrated quality management systems must be part of an Industry 4.0 strategy.

The series of webinars is organized by iBASEt, a solution provider focusing at Aerospace & Defense, Electronics, Industrial Equipment, Nuclear and Shipbuilding industry sectors.

Click on below to view Recording:
https://info.ibaset.com/on-demand-webinar-why-quality-must-be-embedded-in-the-production-process

Using Manufacturing Maturity to create focus for your improvements!

Are you wondering where to invest? Not only your money but also your limited resource of your people’s time?

April 28, 2021 –during this webinar Gerard Ipskamp of the Manufacturing Operations Management Institute (MOMi)  introduced Manufacturing Maturity and its benefit to help you choose where and how to invest.

During the current Covid19 restrictions, visiting organisations on site might be a challenge.  Gerard explained how having a higher manufacturing maturity, an organization is in a stronger position to leverage the opportunities the 4th Industrial Revolution will potentially bring.  In addition to this presented an approach, based on experience, how a Manufacturing Maturity Assessment can be organized and executed remotely.

Click on below to view Recording:
https://attendee.gotowebinar.com/recording/1945624722878918151  

Manufacturing Maturity Webinar

How the Digital Thread is Critical for Your Industry 4.0 Success

Establish digital continuity as a model-based enterprise

April 7, 2021 – Investing in a Manufacturing Execution System (MES) is often justified as part of an Industry 4.0 strategy. Yet, disconnected operations can block much of the potential for improved performance. A digital thread can overcome this challenge by establishing digital continuity across the entire product lifecycle – from cradle to grave.

In this sixth webinar for iBASEt, MOMi president Jan Snoeij explained how a digital thread should be the backbone of any digital transformation program. He will share how a digital twin, first created in product design, can be extended to production and sustainment systems to drive higher operational performance, collaboration, and profitability.

The series of webinars is organized by iBASEt, a solution provider focusing at Aerospace & Defense, Electronics, Industrial Equipment, Nuclear and Shipbuilding industry sectors.

Click on below to view Recording:
https://info.ibaset.com/on-demand-webinar-how-digital-thread-is-critical-for-industry-4.0-success

Pick the Right Metrics for MES Success

Measure what matters to drive forward your Industry 4.0 vision

March 10, 2021 – The fourth industrial revolution has taught us the importance of accessing the right data for intelligent decision support. Similarly, a successful implementation of a Manufacturing Execution System (MES) can only be achieved by first picking the right metrics to measure progress and identify shortcomings. Use this intelligence to realize Industry 4.0 success.

In this fifth webinar for iBASEt, MOMi president Jan Snoeij continued his webinar series providing guidance on how to pick the right Key Performance Indicators (KPIs) to measure to success of your MES implementation. He told more about how to identify the relevant metrics to monitor your MES implementation to maximize the likelihood of success

The series of webinars is organized by iBASEt, a solution provider focusing at Aerospace & Defense, Electronics, Industrial Equipment, Nuclear and Shipbuilding industry sectors.

Click on below to view Recording:
https://info.ibaset.com/on-demand-webinar-pick-the-right-metrics-for-mes-success

MOM Solution Guide LIMS/ELN

The Shortcut for you Selection Process

February 23, 2021 – Quality Control is a very important activity in manufacturing. The generated and collected data and information is essential for data analytics and artificial intelligence. A LIMS /ELN will assist your organization to become more mature in manufacturing.

Performing a LIMS/ELN selection can be an extensive process of gathering and evaluating information. With this solution guide you can go directly to the URS/demonstration phase with the three best candidates.

In this 30 minute webinar, MOMi expert Gerard Ipskamp highlighted how and why the Solution Guide LIMS/ELN is created, presented trends from vendor answers and discussed how the guide can be used to assist with the selection process, saving time, money and ensuring the best solution is selected for your organizational needs.

You can view the webinar here –  https://register.gotowebinar.com/recording/6137588668663504140

Importance of End User Acceptance

For a Successful Manufacturing Software Implementation

February 3, 2021 – When selecting any new software application, it is critical to remember why the project was originally conceived – to help end user overcome an issue or improve performance. While this concept is obvious, it is often forgotten months into a vendor selection process, a scope of work discussion, or a lengthy purchase negotiation .

In the fourth webinar for iBASEt, MOMi president Jan Snoeij provided insights into just how critical it is to keep a strong focus on user acceptance when defining a Manufacturing Execution (MES), Quality or Maintenance System. He shared practical steps that can be taken to avoid one of the top reasons why MES implementations fail: a lack of necessary end user adoption.

The series of webinars is organized by iBASEt, a solution provider focusing at Aerospace & Defense, Electronics, Industrial Equipment, Nuclear and Shipbuilding industry sectors.

Click on below to view Recording:
https://info.ibaset.com/on-demand-webinar-the-importance-of-end-user-acceptance

Picking the Right MES

Rethinking the MES Selection Process

November 18, 2020, MOMi president Jan Snoeij continued the educational webinar series organized by iBASEt. In this third webinar, he focused on why not all MES solutions are created equal. Different MES applications have specialized capabilities that are critical to understand and evaluate. One size does not fit all. The right MES for your organization depends upon your production and quality process as well as customer expectations in today’s digital world.

iBASEt is a solution provider focusing at Aerospace & Defense, Electronics, Industrial Equipment, Nuclear and Shipbuilding industry sectors. iBASEt published the recording of this webinar at their website.

Click on below to view Recording:
https://info.ibaset.com/on-demand-webinar-picking-the-right-mes

What is IT/OT Convergence?

Why Does it Matter to Industry 4.0 Strategies,
and How Do I Achieve it?

September 30, 2020, iBASEt organized another webinar with MOMi president Jan Snoeij sharing best practices gathered in various projects in which he and his team supported manufacturing companies in improving their operational performance. He explained that convergence of IT and OT is not just about systems. It is enabling IIoT and supporting Industry 4.0 / Smart Manufacturing. Therefore, IT/OT convergence is all about your successful manufacturing business.

iBASEt is a solution provider focusing at Aerospace & Defense, Electronics, Industrial Equipment, Nuclear and Shipbuilding industry sectors. iBASEt published the recording of this webinar at their website.

Click on below to view Recording:
https://info.ibaset.com/webinar-what-is-it-ot-convergence

It is Time to Rethink the RFP Process for MES!

Looking to upgrade your MES?
Be sure your RFP selection process can best evaluate your next solution.

July 22, 2020, MOMi president Jan Snoeij delivered a webinar on this topic, sharing best practices gathered during the last decades in many projects in which he supported manufacturing companies in finding an appropriate MES to improve their operational performance.

The webinar is organized by iBASEt, a solution provider focusing at Aerospace & Defense, Electronics, Industrial Equipment, Nuclear and Shipbuilding industry sectors. iBASEt published the recording of this webinar at their website.

Click on below to view Recording:
https://info.ibaset.com/on-demand-webinar-rethink-rfp-process-for-mes

IT/OT convergence for a connected factory!

June 16, 2020 – IT/OT convergence is often a challenge. It is not just a challenge because of new and exciting technologies but also because of new ways of thinking. This tends to be even a bigger challenge when two different worlds , that have worked separately and with completely different systems, technologies and vendors, must integrate in the context of IIoT and the Industrial Internet.

In this 30 minute webinar, MOMi expert Jan Snoeij explained that convergence of IT and OT is not just about systems. It is enabling IIoT and supporting Smart Manufacturing. Therefore, it is all about your successful manufacturing business.

Click on below to view Recording:
https://attendee.gotowebinar.com/recording/7690180445361596429

Educating for a post corona manufacturing world!

April 2, 2020 – Throughout our global manufacturing community we find ourselves in unprecedented times. It is now thought leaders will realize opportunities to prepare for the future. How will we organize our production supply chains if there is another global event?

In this 30 minute webinar MOMi expert Jan Snoeij highlighted how continued education is key to continuing your digital transformation journey through uncertain times.

Click below to view Recording:
https://attendee.gotowebinar.com/recording/5388567255728375810